Fast arrival CA1645P-03 Frequency Signal Generator counter 0.1Hz-3MHz DDS signal generator (with power output
$203.43
$205.48
75 Day Buyer Protection
Money back guarantee
On time Delivery
Guarantees on time delivery 60 days
This series uses the latest Direct Digital synthesis(DDS)technology to generate stable, high resolution output frequency.The DDS technology solves several problems encountered in traditional function generators,as follows. Temperature change inside the generator greatly affects the components characteristics which lead to output frequency change.The results are poor accuracy and stability ect. it's the ideal equipment of electronic engineers, laboratories, production lines and the teaching and research
Main
Output Waveforms: Sine , Square and Triangle
Amplitude: 20Vp-p(no Load)
Impedance: 50Ω±10%
Attenuation: 0dB,40dB
DC offset: ±10V (no Load)
Duty cycle range: 20% ~ 80% (Square wave)
Display: 6 digits LED
Frequency
Sine wave: 0.1Hz ~3MHz
Square wave: 0.1Hz ~ 2MHz (Valid Range)
Triangle wave: 0.1Hz ~ 1MHz (Valid Range)
Resolution: 100mHz
Frequency stability: ±1×10-6
Frequency error: ±5×10-6
Square Wave
Distortion: <0.6% (Foundation frequency: 1kHz)
Triangle Wave
Linearity: ≥98%,100mHz~100kHz;
≥95%,100kHz~1MHz;
Square Wave
Rising & falling time: <30ns
TTL/CMOS
Amplitude: ≥3 Vp-p
Fan Out: 20TTL Load
CMOS level: 3.5~13.5 Vp-p
Power output
Output power: ≥10W (4Ω Load)
Output wave: sine wave
Frequency range: 20Hz~40kHz
Counter
Measure frequency range: 10Hz~60MHz
Measure Voltage range: 0.2V~20V
Error range: ±1×10-4
Direct digital synthesis technique
Minimum frequency is100mHz
Frequency Accuracy is100mHz
Sine wave distortion is less than 0.6%
TTL/CMOS output
Duty control(Square)
DC control
Volt and Frequency display
Output ON/OFF control
External counter
Power output
Signal output cable 1pcs
Power output cable 1pcs (Chose match)
Power cable 1pc
User manual 1book
Length: 300mm
Wide: 265mm
High: 110mm
Weight: About 2.1kg
AC output voltage: 220 VAC±10%
AC output freqenucy: 50Hz±5%
Power consumption: 5W